Print Recipe

How to Make Toy Story Ribbon Garland

Make either Buzz Lightyear or Woody themed ribbon garland. A perfect simple decoration for your Toy Story party!
Author: Linden Three

Equipment

Ingredients

Buzz Lightyear Ribbon Garland

  • 1/4 yard gray cotton fabric
  • 1/4 yard purple cotton fabric
  • 1/4 yard lime green cotton fabric
  • 6+ feet cord (or string, to hang garland)

Woody Ribbon Garland

  • 1/4 yard cow print cotton fabric
  • 1 red bandana
  • 1/4 yard yellow cotton fabric
  • 1/4 yard blue cotton fabric
  • 6+ feet cord (or string, to hang garland)

Instructions

  • Iron the fabric if desired or needed to eliminate any creases.
  • To make the garland, cut the fabric into strips approximately 8 inches long and 1.5 inches wide (adjust the size based on what you like and need!)
  • Cut a small, horizontal slit into each piece of fabric at a short end, right in the middle of the width, approximately 1/2 inch from the end. Lay out your cord. Wrap the strip under and over the cord, then through the slit, then pulled slightly tight (think of how a normal necktie looks, or when you want to tie string, a leash, etc around a pole). I didn't pull the strips completely tight as then they would be more difficult to position.
  • Repeat this process in the sequence of fabrics that you like until you get your desired ribbon length (approximately 4 feet with these material quantities).
  • Cut the cord to the length that you need to cover the space, leaving a gap on each end for hanging (at least one foot on each side).

Notes

Each set of materials above would make one string of garland with 4 feet of ribbon, plus at least one foot of cord to hang with on each side.
Some material links:
You can also find the fabrics at your local crafting store, or even substitute some of the fabrics for plain colored bandanas.